Panasonic AJ-HD1700 Specifications, General, Video Input Connectors, Video Output Connectors, 130

Specifications

[GENERAL]

Power supply: AC 100–240V, 50–60 Hz (AJ-HD1700P)

AC 100–240V, 50–60 Hz (AJ-HD1700E) Power consumption: 240W

indicates the safety information.

Operating ambient temperature:

41 xF to 104 xF (5xC to 40 xC)

Operating ambient humidity:

10% to 80% (no condensation)

Weight:

Approx. 48.4 lbs (22 kg)

Dimensions (W k H k D):

16-3/4 (max. 17-3/16 ) k 6-15/16k17-11/16 inches (not including supporting feet, jacks and connectors, JOG

dial and fan)

424 (max. 435.4) k 175.2 k 448.9 mm

Recording format:

DVCPRO HD-LP

Video signals recorded:

1080i (50/59.94/60 Hz switchable)

720p (59.94/60 Hz switchable) 480i/59.94 Hz

576i/50 Hz (when optional board AJ-UC1700G is installed)

Audio signals recorded:

48 kHz, 16 bits, 8 channels

Recording tracks: Digital video/audio:

helical tracks

(Time code is recorded in sub-code area.) Cue track:

1track Control track:

1track

Tape speed:

67.64mm/sec. (in 59.94 Hz mode)

67.70mm/sec. (in 60 or 50 Hz mode)

Tape used:

Metal tape

Recording time:

126 minutes (using XL cassette)

92 minutes (using L cassette)

32 minutes (using M cassette)

FF/REW time:

Approx. 1 min. 30 sec. (when XL cassette is used and i100 k or j100 k speed is selected)

Search speed:

d100 k

Digital slow:

j1 k to i2 k (when playing back tapes recorded using the DVCPRO HD-LP format)

j1 k to i1.1 k (when playing back tapes recorded using any other format)

Editing accuracy:

d0 frames (when time code is used, in 50 Hz, 59.94 Hz or 60 Hz mode)

Tape timer accuracy:

d1 frame (when continuous CTL signal is used)

Servo lock time:

Less than 0.3 sec. (from standby ON)

Loading time:

Approx. 4 sec.

Audio split editing:

Provided

[VIDEO]

Sampling frequencies:

Y:74.25 MHz, Pb/Pr: 37.125 MHz

Quantizing:

8 bits

Video compression method: DCT i variable length code

Video compression rate: 1/6.7

Error correction: Reed-Solomon product code

Video recording bit rate: 100 Mbps

Video Input Connectors

HD serial digital input:

BNC k 1 (complies with SMPTE 292M standard),

BNC k 1 (active-through)

SD serial digital input (option):

BNC k 1 (complies with SMPTE 259M-C standard),

BNC k 1 (active-through)

SDTI input (option):

BNC k 1 (complies with SMPTE 305M/SMPTE 321M

standards)*
HD reference input:
BNC	k 2 (loop-through), 75	™ ON/OFF selectable
SD reference input:
BNC	k 2 (loop-through), 75	™ ON/OFF selectable

Video Output Connectors

HD serial digital output:

BNC k 3 (complies with SMPTE 292M standard),

BNC k 1 (monitor output with superimposed display)

SD serial digital output:

BNC k 1 (complies with SMPTE 259M-C/SMPTE 294M standards),

BNC k 1 (monitor output with superimposed display)

SDTI output (option):

BNC k 1 (complies with SMPTE 305M/SMPTE 321M standards)

HD reference output:

BNC k 1

SD reference output:

BNC k 1

Analog composite output:

BNC k 3, VIDEO 1, VIDEO 2 (WFM OUT), VIDEO 3 (superimposed ON/OFF), output during SD playback or

during down-conversion

*The optional AJ-UC1700G SD serial digital input board and optional AJ-YAC150P SDTI input board cannot be installed at the same time. Install one or the other.

130