Panasonic AJ-HD1700 manual Tape, Output, Reset, Inh All, Pre, Norm, Auto, Outref Input, CAP. Lock

Function menus

<HOME>

Function		Switching			Setting	Corresponding setup				Description of setting
button/item		method				menu item
F1		Toggle			TAPE	No. 140	For selecting the output signals.
OUTPUT					EE	OUTPUT
							<In the STOP mode>
							TAPE:			In the STOP mode, the signals played back from the
							tape are output.
							During recording or editing (*), simultaneous playback
							signals are output.
							*: Setup menu item No.302 (CONFI EDIT) must be set.
							EE : The input signals selected by the setup menu items
							No.600 (VIDEO IN SEL) and No.713 (CH1 IN SEL) to
							No.724 (D IN SEL 78) settings are output.
F2		___		___		___				___
___
F3		Toggle			TC	___	For selecting the time counter display.
TC/CTL*	2				UB
					CTL		TC	:		The time code value is displayed.
							UB:			The user’s bit value is displayed.
							CTL:			The control signal (time data) is displayed.
F4		Press			RESET	___	For resetting the time counter display.
TC CLR*	1						If the			F4 button is pressed while the	control signal (time
							data) is displayed on the time counter, it is reset to zero.
F5		___		___		___				___
___
F6		Fi toggle			OFF	No. 113	Refer to the setup menu.
R INH					ALL	REC INH	<Note>
					PRE		The setting can be changed from OFF to ALL simply by
					NORM		operating the function button without pressing the F button.
					V/CTL
F1 (SHIFT)		Toggle	i		0s --- 5s ---	No. 000	Refer to the setup menu.
PREROL		ADJ			30s	P-ROLL TIME
F2 (SHIFT)		___		___		___				___
___
F3 (SHIFT)		Fi toggle			AUTO	No. 031	Refer to the setup menu.
OUTREF					INPUT	OUT REF
					HD_REF
					SD_REF
F4 (SHIFT)		Fi toggle			2F	No. 109	Refer to the setup menu.
CAPSTN					4F	CAP. LOCK
					8F
F5 (SHIFT)		___		___		___				___
___
F6 (SHIFT)		Toggle			OFF	___	For selecting the variable memory mode.
VARMEM*	1				ON
							OFF		:The variable memory mode is not used.
							ON:		The status is established in which		variable memory
										playback or variable memory editing is enabled.
*1: This item is not displayed when the 23/24 Hz or 25 Hz (HD or SD) mode has been selected as the system menu item No.25 (SYSTE											M
FREQ) setting.
*2: CTL cannot be selected when the 23/24 Hz or 25 Hz (HD or SD) mode has been selected as the system menu item No.25 (SYSTEM
FREQ) setting. TC is selected when the power is turned on.

*The underlining (__) denotes the factory setting mode.

46