Panasonic AJ-HD1700 manual Ctl, Tcg, Ubg, Tcr/T

Parts and Their Functions

Time code display

6

4

SHIFT F1 F2

5

3Time counter display

CTL:		CTL counter data
TCG:		Time code data of time code generator
UBG:		User’s bit data of time code generator
tcg:		When the time code data of the time
		code generator is preset
ubg:		When the user’s bit data of the time
TCR/T	¢R:	code generator is preset
		Time code data of the time code reader
UBR/U ¢R:		User’s bit data of the time code reader

If the time code data or user’s bit data could not be

read properly, “T ¢R” or “U ¢R” appears on the display and, if the CTL signal is present, the time

code data is supplemented by this signal.

TCR 00 : 00 : 00 : 00.

(59/60 Hz mode only)

Drop frame marks:

“: ”: Non-drop frame

“. ”: Drop frame

Field marks

“”: 1st field

“. ”: 2nd field

(These marks are not displayed at any

speed above w0.3 k.)

3

F3 F4 F5 F6

4Variable memory mode indicator

This is displayed when “ON” has been selected as

the F6 (VARMEM) setting on the <HOME SHIFT> menu.

While VM is lighted, variable memory operations can be performed at any time. (For details, refer to the “Variable memory function” on page 36.)

5Back page menu indicator

6Function button operation inhibited indicator

This is displayed when the			button	BS
while the		is held down.	When it appears,
	buttonF

the operation of the function buttons can be

inhibited.	When the
					BS	is pressed again
while the				is held down,			the display is
		F	button

cleared, and it becomes possible to operate the function buttons.

17