Power supply
A battery pack or an AC power source can be used as this unit’s power supply.
To use the battery pack, there is a choice of three makes of batteries, namely:
OPanasonic
OAnton/Bauer
OSony
<Note>
Batteries of other makes can also be supported by changing the setting menu but no guarantees are made for the system when they are actually used with this unit.
Before using the battery pack, recharge the battery using the battery charger.
(For details on the recharging method, refer to the operating instructions of the battery concerned.)
1 Attach the battery pack.
Insert the pack in the direction shown by the arrows, and then slide it into position.
Power output socket for lighting
Lighting control switch
2 To detach the battery, pull the battery mount removal lever all the way down, and slide the battery pack in the direction shown by the arrow.
Removal lever
Battery pack
<Note>
An intelligent battery system and ultra light system are supported.
The remaining battery charge displayed inside the viewfinder is usually shown as a percentage of the full charge, but when the battery charge is nearly completely dissipated, the percentage display is replaced with a voltage display.
21