Viewfinder lamp displays

1

TALLY / REC

 

 

BATT

 

 

 

 

 

 

 

VTR

Viewfinder pictured here is the AJ-HVF20

 

 

 

 

 

 

 

 

SAVE

 

 

 

 

 

 

(For details concerning the viewfinder, refer to

 

 

 

 

 

 

3

2

4

the operating intructions of the viewfinder.)

1TALLY/REC (recording) lamp

This lights up (red) during recording. It flashes when a problem has occurred.

For details, refer to the section on the “Warning system” (pages 105, 106).

2BATT (battery) lamp

This starts flashing when the battery voltage has dropped to the level where the battery will no longer be usable in several minutes’ time, and it lights when the battery is no longer usable. To prevent operation from being interrupted, replace the battery before the battery has discharged completely.

For details, refer to the section on the “Warning system” (pages 105, 106).

3 (abnormal operating status warning) lamp This lights when the unit is set to an abnormal operating status for any of the items set to “ON” on the “!LED” screen of the setting menu.

For details on selecting the items targeted for the

lamp display, refer to the section on “Setting the

lamp displays” (next page).

4VTR SAVE (VTR power-saving) lamp

This lights when the VTR SAVE/STBY switch is set to SAVE. It goes off during recording.

<Note>

In the rec pause mode, the SAVE mode is established automatically, and the lamp lights after the time set for the pause timer (temporary stop time) has elapsed.

After two minutes in the play pause mode, the SAVE mode is established automatically, and the lamp lights.

38