Power supply

Using the Sony BP-L60/L90 lithium- ion battery

1 Attach the accessory battery mounting connector. (Refer to the previous page.)

2 Attach the battery holder for the lithium-ion battery.

1.As shown in the figure, detach the battery clamp, and attach the holder using the mounting screws.

2.Tighten the power contact screws.

3.Attach the battery clamp.

Using an AC power supply

When the AJ-B75 AC adapter is used

1 Connect the DC OUT connector on the AJ-B75 AC adapter to the EXT DC IN socket on the unit.

Battery clamp

<Notes>

O Before connecting or disconnecting the plug, be absolutely sure to turn off the unit’s power.

O When attaching the battery case or holder, take care not to pinch the connecting cord.

EXT DC IN socket

2 Set the power of the AC adapter to ON.

3 Set the unit’s power switch to ON.

<Notes>

O Check the pin signals of the EXT DC IN socket when using an external power supply other than the AJ-B75 AC adapter. (DC 12 V, 8.5 A)

O Power from the AC adapter takes precedence when both a battery pack and AC adapter have been connected.

O When using the AC adapter, be absolutely sure to first set the power of the AC adapter to ON and then set the unit’s power switch to ON.

If the power is turned on in the reverse sequence, the output voltage of the AC adapter will rise gradually, and the unit may malfunction as a result.

Pin no.

Signal

4

1

GND

3

2

2, 3

==

1

4

+12 V

 

24