Attaching the rain cover

Example showing use of the SHAN-

RC700 rain cover

Tighten the cord.

Close using the fastener.

Close using the fastener.

Connecting the extension control unit

By connecting the AJ-EC3 extension control unit (optional accessory), some of the functions can be operated by remote control.

When the AJ-EC3 is connected and the POWER switches on the unit and AJ-EC3 are set to ON, the unit is automatically set to the remote control mode.

Dedicated cable

AJ-

6 5

∫ 1

<Notes>

O Before connecting or disconnecting the dedicated cable, be absolutely sure to set the POWER switches on the unit and AJ-EC3 to OFF.

O When “OFF” has been selected as the ECU DATA SAVE setting on the CAMERA SW MODE screen of CAM MENU, all the adjustments and settings made using the AJ-EC3 will be cleared when the unit’s power switch is set to OFF. Neither is it possible to save these adjustments and settings on a setup card.

However, the menu item settings can be saved on a setup card.

When the AJ-EC3 is connected again, its settings will be restored.

O When “ON” has been selected as the ECU DATA SAVE setting on the CAMERA SW MODE screen of CAM MENU, all the adjustments and settings made using the AJ-EC3 will not be cleared even when the unit’s power switch is set to OFF.

ECU connector

AJ-EC3

37