Parts and their functions

Power supply section

Accessory mounting section

1

4

2

3

1Battery mount

This is for attaching the Anton/Bauer battery pack.

2DC IN (external power input) socket (XLR, 4P) When operating this unit using an AC power source, this socket is connected to the model AJ- B75 AC adapter (optional accessory).

3BREAKER button

To protect the equipment, the circuit breaker is tripped when an overcurrent flows inside the unit, and the power is automatically turned off. Push this button to the pushed-in position after performing internal inspections and adjustments. If there is no problem, the power will be turned back on.

4POWER switch

ON : Set here to turn on the power.

OFF: Set here to turn off the power.

12

1

5

6

3

4

6

9

8

7

1Hooks for attaching shoulder strap

Attach the ends of the accessory shoulder strap to these hooks.

2Light shoe

Use this to attach the video light, etc.

3Lens mount (Bayonet type) Use this to attach the lens.

4Lever for securing lens

Insert the lens into the lens mount 3, and turn the lens mount ring using this lever to secure the lens.

5Lens mount cap

To remove the cap, push the lever for securing the lens 4 up.

Keep the cap in place while the lens is not attached.

6Lens cable/microphone cable clamp

This clamp is for anchoring the lens cable or microphone cable.

7Tripod mount

Mount the tripod attachment (SHAN-TM700), available as an optional accessory, when the unit is to be anchored to the tripod.

8LENS terminal (12-pin)

The connecting cable of the lens is connected here. For details concerning the lenses that can be used, consult your dealer.

9Shoulder pad

This pad can be adjusted to facilitate operation when the unit is operated on the user’s shoulder. The pad position can be moved forward or backward when the two securing screws are loosened.

9