Panasonic AJ-HDC20A P HIGH SETTING screen, ADDITIONAL DTL2 screen, ADDITIONAL DTL 1 screen

Setting menu screens (CAM MAIN MENU 1)

HIGH SETTING screen

The high level gain is set on this screen.

Item	Variable	VF	Remarks
	range	display
MASTER GAIN	–3dB	USER	–3 dB, 0 dB, 3 dB, 6 dB, 9
	:	ENG	dB, 12 dB, 15 dB, 18 dB,
	12dB		21 dB, 24 dB, 27 dB or 30
	:		dB can be set.
	30dB
H. DTL LEVEL	0	USER	For setting H.DTL (detail)
	:	ENG	level.
	6
	:
	63
V. DTL LEVEL	0	USER	For setting V.DTL (detail)
	:	ENG	level.
	10
	:
	63
DTL CORING	0	USER	For setting DTL coring.
	:	ENG
	5
	:
	15
H. DTL FREQ	0	USER	For selecting H.DTL
	:	ENG	FREQUENCY.
	2
	:
	29
LEVEL DEPEND	0	USER	For setting LEVEL
	:	ENG	DEPEND.
	2		The detail of only the dark
	:		areas is removed when
	5		the Y detail is boosted.
			The higher the figure set
			for this item, the broader
			the range of the detail
			which is removed.
MASTER	0.35	USER	Master gamma setting.
GAMMA	:	ENG	(0.01 step)
	0.45
	:
	0.75
BLACK	ON	USER	For setting the mode to
STRETCH	OFF	ENG	compensate for low-
			brightness black stretch to
			ON or OFF.
MATRIX TABLE	A	USER	For selecting the color
	B	ENG	correction matrix table.
	OFF
COLOR	ON	USER	For setting the 12-axis
CORRECTION	OFF	ENG	independent color
			correction to ON or OFF.

ADDITIONAL DTL 1 screen

The special detail features of the camera are set on this screen.

Item	Variable	VF	Remarks
	range	display
KNEE	ON	USER	For setting the knee
APERTURE	OFF	ENG	aperture to ON or OFF.
			At the “ON” setting, the
			detail above the knee
			point is boosted.
SLIM DTL	ON	USER	For setting the mode to
	OFF	ENG	make the detail finer to
			ON or OFF.

ADDITIONAL DTL2 screen

The special detail features of the camera are set on this screen.

Item	Variable	VF	Remarks
	range	display
KNEE APA LVL	0	USER	For changing the detail
	5	ENG	level in the high-
			brightness areas.
DTL GAIN (+)	–31	USER	For changing the H detail
	:	ENG	level in the “+” direction.
	+00
	:
	+31
DTL GAIN (–)	–31	USER	For changing the H detail
	:	ENG	level in the “–” (bottom)
	+00		direction.
	:
	+31
DTL CLIP	00	USER	For changing the clipping
	:	ENG	level of the detail signal.
	63
DTL SOURCE	(G+B)/2	USER	For setting the ratio
	(R+G)/2	ENG	between the RGB signal
	(2G+R+B)/4		components which
	(3G+R)/4		generate the detail signal.
	R
	G

The underlining in the variable range column indicates the setting in the preset mode.

81