Setting the time data

Setting the time code

1 Set the DISPLAY switch to TC.

2 Set the TCG switch to SET.

3 Switch the TC MODE to DF or NDF on the TC/UB screen of VTR MENU.

Select DF to run the time code in the drop frame mode or select NDF to run the time code in the non-drop frame mode.

4 Set the time code using the SHIFT button, “+” button and “–” button.

SHIFT button:

This is used to start the digit to be set flashing. Each time it is pressed, the flashing moves by one digit to the right.

“+” button:

This increments by 1 the numerical value of the flashing digit.

“–” button:

This decrements by 1 the numerical value of the flashing digit.

5 Select the TCG switch position.

Select F-RUN for running the time code in the free- run mode or select R-RUN for running it in the rec- run mode.

Time code when the battery is replaced

The backup function works even when the battery is replaced, and the time code generator continues to operate for a prolonged duration (approx. 1 year).

<Note>

When the POWER switch is set to ON 5 OFF 5 ON, the backup accuracy of the time code is approximately ±2 frames.

1

2,5

4

56