Setup card operations

Give a title to the selected file.

9 Turn the JOG dial button to move the arrow (cursor) to the WRITE item.

< CAM CARD READ/WRITE >

READ

SELECT :1

nWRITE

SELECT :1

CARD CONFIG

READ USER DATA

TITLE :

10 When the JOG dial button is pressed, the following message appears.

< CAM CARD READ/WRITE >

READ

SELECT :1

WRITE

SELECT :1

CARD CONFIG

READ USER DATA

TITLE :

WRITE ?

YES

n NO

TITLE :

11 Turn the JOG dial button to move the arrow (cursor) to YES, and press the JOG dial button. When the data saving is completed, the following message appears.

< CAM CARD READ/WRITE >

READ

SELECT :1

WRITE

SELECT :1

CARD CONFIG

READ USER DATA

TITLE :

WRITE OK

YES

nNO

TITLE :

To save the VTR unit’s data, open the VTR CARD READ/WRITE screen, and perform steps 9 to 11.

If one of the following messages appears when the JOG dial button is pressed, the data cannot be saved.

Error message

Remedial action

 

 

WRITE NG

Insert the card.

NO CARD

 

(setup card has not been

 

inserted)

 

 

 

WRITE NG

The card was formatted by a

FORMAT ERROR

device other than the unit.

(formatting error)

Replace the card.

 

 

WRITE NG

The card may be defective.

ERROR

Replace it.

(the data cannot be saved)

 

 

 

12 Press the MENU button to exit the menu operations.

The setting menu is cleared, and the display showing the unit’s current statuses appears at the top and bottom of the viewfinder screen.

62