Power supply

Using the Sony NP-1 battery pack

Using the Sony BP-90 battery pack

1 Detach the battery mount. See page 22.

2 Attach the accessory battery mounting connector.

3 Attach the Sony battery holder. As shown in the figure, attach the battery case with the cover detached and then the detached cover.

1Tighten the mounting screws.

2Tighten the power contact screws.

3Insert the top of the detached cover in the

direction shown by the arrows.

4Align the holes in the bottom of the cover (metal part) with the holes at the bottom of the case, and use the battery holder screws to attach the case to the battery mounting connector.

1

3

4

2

1 Attach the accessory battery mounting connector.

2 Attach the battery case for the BP-90.

1.Tighten the mounting screws.

2.Tighten the power contact screws.

3.Insert the top of the detached cover in the direction shown by the arrows.

4.Align the holes in the bottom of the cover (metal part) with the holes at the bottom of the case, and use the screws to attach the case.

<Note>

When mounting the battery holder, take care not to pinch the connecting cord.

23