Setting menu screens (VTR MAIN MENU)

MIC/AUDIO screen

The MIC/AUDIO settings are performed on this screen.

Item

Variable

VF

 

Remarks

range

display

 

 

 

 

 

 

 

 

MIC LOWCUT

FRONT

USER

For setting the high-pass

CH2

REAR

ENG

filter for the CH2 mic input.

 

F&R

 

FRONT: The high-pass filter

 

OFF

 

 

for the front mic

 

 

 

 

input is set to ON.

 

 

 

REAR : The high-pass filter

 

 

 

 

for the rear mic

 

 

 

 

input is set to ON.

 

 

 

F&R

: The high-pass

 

 

 

 

filters for both the

 

 

 

 

front and rear mic

 

 

 

 

inputs are set to

 

 

 

 

ON.

 

 

 

OFF

: The high-pass filter

 

 

 

 

for the CH2 input

 

 

 

 

is set to OFF.

 

 

 

 

LIMITER

ON

USER

For switching the audio

 

OFF

ENG

limiter to ON or OFF.

 

 

 

ON

: The limiter operates.

 

 

 

OFF : The limiter does not

 

 

 

 

operate.

 

 

 

 

TEST TONE

NORMAL

USER

NORMAL:

 

ALWAYS

ENG

The test tone signal is

 

OFF

 

output when the AUDIO

 

CHSEL

 

IN switch for CH1 is set

 

 

 

to front while BAR is

 

 

 

selected as the

 

 

 

CAM/BAR switch setting.

 

 

 

ALWAYS:

 

 

 

The test tone signal is

 

 

 

always output when BAR

 

 

 

is selected as the

 

 

 

CAM/BAR switch setting.

 

 

 

OFF:

 

 

 

The test tone signal is

 

 

 

not output.

 

 

 

CHSEL:

 

 

 

The test tone signal is

 

 

 

output for the selected

 

 

 

channel when the

 

 

 

AUDIO IN switch CH1 or

 

 

 

CH2 is set to front while

 

 

 

BAR is selected as the

 

 

 

CAM/BAR switch setting.

 

 

 

 

 

<Note>

The frequency characteristics in the MIC LOWCUT ON mode are 200 Hz to 10 kHz.

Item

Variable

VF

Remarks

range

display

 

 

 

 

 

 

REC CH3/CH4

CH1/2

USER

For setting the audio

 

CH3/4

ENG

signals to be recorded on

 

 

 

the CH3 track and CH4

 

 

 

track.

 

 

 

CH1/2:

 

 

 

The CH1 signal is

 

 

 

recorded on the CH3

 

 

 

track, and the CH2

 

 

 

signal is recorded on the

 

 

 

CH4 track.

 

 

 

CH3/4:

 

 

 

The CH3 and CH4

 

 

 

signals which are

 

 

 

supplied from the

 

 

 

camera adapter are

 

 

 

recorded.

 

 

 

 

CUE SELECT

SIDE SW

USER

For setting the audio

 

CH1

ENG

signals to be recorded on

 

CH2

 

the cue track.

 

MIX

 

SIDE SW:

 

 

 

The signals selected by

 

 

 

the CUE switch on the

 

 

 

side panel are recorded.

 

 

 

CH1:

 

 

 

The CH1 signals are

 

 

 

recorded.

 

 

 

CH2:

 

 

 

The CH2 signals are

 

 

 

recorded.

 

 

 

MIX:

 

 

 

The CH1 and CH2

 

 

 

mixed signals are

 

 

 

recorded.

 

 

 

 

CUE REC

ON

USER

For setting whether

 

OFF

ENG

signals are to be recorded

 

 

 

on the cue track.

 

 

 

ON : The signals will be

 

 

 

recorded on the cue

 

 

 

track.

 

 

 

OFF : The signals will not

 

 

 

be recorded on the

 

 

 

cue track.

 

 

 

The power-saving

 

 

 

mode is established.

 

 

 

 

The underlining in the variable range column indicates the setting in the preset mode.

99