Setup card operations
1 Perform the menu operations (pages 70 to 72), and display the “CAM CARD READ/WRITE” screen.
n< CAM CARD READ/WRITE >
READ
SELECT :1
WRITE
SELECT :1
CARD CONFIG
READ USER DATA
TITLE :
Select the file No.
2 Turn the JOG dial button to move the arrow (cursor) to the SELECT item which comes after READ, and press the JOG dial button.
< CAM CARD READ/WRITE >
READ |
|
n SELECT | :1 |
WRITE |
|
SELECT | :1 |
CARD CONFIG
READ USER DATA
TITLE :
3 Turn the JOG dial button to select any number from 1 to 8, and press the JOG dial button.
Load the data of the selected file.
4 Turn the JOG dial button to move the arrow (cursor) to the READ item.
< CAM CARD READ/WRITE >
nREAD
SELECT :1
WRITE
SELECT :1
CARD CONFIG
READ USER DATA
TITLE :
5 When the JOG dial button is pressed, the following message appears.
< CAM CARD READ/WRITE >
READ
SELECT :1
WRITE
SELECT :1
CARD CONFIG
READ USER DATA
TITLE :
READ ?
YES
n
NO 
TITLE :
6 Turn the JOG dial button to move the arrow (cursor) to YES, and press the JOG dial button. When the data loading is completed, the following message appears.
< CAM CARD READ/WRITE >
READ
SELECT :1
WRITE
SELECT :1
CARD CONFIG
READ USER DATA
TITLE :
READ OK
YES
nNO
TITLE :
To load the VTR unit’s data, open the VTR CARD READ/WRITE screen, and perform steps 4 to 6.
If one of the following messages appears when the JOG dial button is pressed, the data cannot be loaded.
Error message | Remedial action |
|
|
READ NG | Insert the card. |
NO CARD |
|
(setup card has not been |
|
inserted) |
|
|
|
READ NG | The card was formatted by a |
FORMAT ERROR | device other than the unit. |
(formatting error) | Replace the card. |
|
|
READ NG | Save the file data. |
NO FILE |
|
(file not found) |
|
|
|
READ NG | Data saved by devices other than |
ERROR | unit cannot be loaded. |
(the data cannot be loaded) |
|
|
|
7 Press the MENU button to exit the menu operations.
The setting menu is cleared, and the display showing the unit’s current statuses appears at the top and bottom of the viewfinder screen.
63