Selecting the units

Up to four units can be operated using one accessory wireless remote control. Up to five units and devices can be operated using one controller.

Select the unit (or units) to be operated from the wireless remote control or controller. Even when using only one unit, it must still be selected.

When performing the operations using the

accessory wireless remote control

Press the [CAM1], [CAM2], [CAM3] or [CAM4] button.

The unit’s status display lamp blinks green when a signal matched by the remote control ID has been received, and it blinks orange when a signal that is not matched by the remote control ID has been received.

When performing the operations

using the controller

When the AW-RP655 is connected:

Press the [1], [2], [3], [4] or [5] button of

[CONTROL/PREVIEW MONITOR OUT SEL].

When the AW-RP555 is connected:

Press the [1], [2], [3], [4] or [5] button of [CONTROL].

When the AW-RP400/AW-CB400 is connected:

Press the [1], [2], [3], [4] or [5] button of

[CONTROL SELECT].

Operations can be performed from both the

AWRP400 and AW-CB400, but depending on the settings, it may be possible to perform the operations using only one of the controllers.

For further details, refer to the Operating Instructions of the controller.

18

Page 18
Image 18
Panasonic AW-HE100N operating instructions Selecting the units, When performing the operations Using the controller