Limiters

This unit comes with settings (referred to as “limiters”) that restrict the panning and tilting movement ranges.

Depending on where the pan-tilt head system has been installed, obstacles may be present within the travel range with which the camera may come into contact.

Contact with any such obstacle by the camera may cause malfunctioning or accidents.

In this case, contact can be prevented by setting the limiters directly before any such obstacle.

The positions of four limiters — namely, the upper, lower, left-most and right-most limits of the travel range — can be set. Once they have been set, the positions will not be lost even after the power has been turned off.

The limiters can be set and released using either the accessory wireless remote control or the controller. Whatever was set or released last takes precedence.

For the controller operations, refer to the Operating Instructions of the controller.

The settings of the limiters using the accessory wireless remote control will be described here.

53

Page 53
Image 53
Panasonic AW-HE100N operating instructions Limiters