Manual shooting
Manually adjusting the focus
The lens focus can be adjusted manually.
When performing the operations using the
accessory wireless remote control
1 Press the [M/FOCUS] button to switch the focus to manual adjustment.
2 Press the [F] or [N] button of [FOCUS], and adjust the focus.
When the [F] button is pressed, the focus moves further away (far); conversely, when the [N] button is pressed, it moves nearer (near).
The speed of focusing and other adjustments can be switched to fast or slow by pressing the [FAST] or [SLOW] button, respectively.
3 If necessary, press the [A/FOCUS] button to return the focus to the automatic adjustment.
When doing the adjustment
using the controller
When the
1 Press the [EXT(AF)] button to switch the focus to manual adjustment.
2 Adjust the focus manually by turning the dial above the lighted [FOCUS] lamp whether it is the lamp of the [PAN/TILT] lever or [ZOOM] lever.
Furthermore, every time the [SPEED] button is pressed, the speed of the focusing and other adjustments can be switched to fast or slow.
3 If necessary, press the [EXT(AF)] button to return the focus to the automatic adjustment.
When the
1 Press the [EXT(AF)] button to switch the focus to manual adjustment.
2 Adjust the focus manually by tilting the [FOCUS] lever.
Furthermore, every time the [SPEED] button is pressed, the speed of the focusing and other adjustments can be switched to fast or slow.
3 If necessary, press the [EXT(AF)] button to return the focus to the automatic adjustment.
When the AW-RP400 is connected:
1 Press the [EXT(AF)] button to switch the focus to manual adjustment.
2 Adjust the focus manually by turning the [FOCUS] dial near the [ZOOM] lever.
Furthermore, the speed of the focusing can be adjusted by turning the [FOCUS] dial of [SPEED CONTROL]. Turning the dial counterclockwise as far as it will go can disable all operations.
3 If necessary, press the [EXT(AF)] button to return the focus to the automatic adjustment.
Notes
When the focus is set to manual, the subject may go out of focus during zooming. Therefore, the unit comes with a function which compensates for this. (Focus compensation during zooming function)
This function was set to ON at the factory.
If the function has been set to OFF, either adjust the focus, as required, after zooming or set the focus to auto.
When the ON/OFF setting of auto focus (AF) is switched from
25
