Panasonic AW-HE100N  Manual adjustment, When doing the adjustment Using the controller

White balance adjustment

Manual adjustment

The white balance can adjusted manually only while the user mode is established.

Use an oscilloscope or waveform monitor for the adjustment or perform the adjustment in such a way that the white parts of the picture are made completely white.

1 Shoot a white subject so that it fills the screen.

2 Set to the user mode, select “AWC A” or “AWC B” for the white balance, and then follow the steps for automatically adjusting the white balance adjustment (page 31).

When performing the operations using the

accessory wireless remote control

3 Set to the user mode by following the steps in “Selecting the shooting modes (scene files)” (page 20).

At this time, keep the “User Mode Set” sub-menu on the display.

 User Mode Set 

Brightness Set

Color Set

G/L, Setup Set

Sharpness(DTL) Set

Other Set

Initialize

Return

4 Press the [] or [] button to make “Color Set” blink.

5 Press the [] or [] button.

The “Color Set” sub-menu is displayed.

 Color Set 
Chroma Level	+1
White Bal	AWC A
Pedestal	+1
Painting
R Gain	+1
B Gain	+1

Return

6 Press the [] or [] button to make the “R Gain” or “B Gain” value blink.

7 Press the [] or [] button to change the value, and adjust this value in such a way that the carrier of the white parts of the video signals is minimized or that the white parts of the picture are made completely white.

8 Press the [MENU] button for two seconds.

The menu display is exited.

When doing the adjustment

using the controller

The same operations as those starting in step 3 of “When performing the operations using the accessory wireless remote control” can be performed following the operation procedure for “Basic menu operations” (page 41).

When the AW-RP655 is connected:

3 Press the [R/B GAIN/PED] button, and ensure that the [GAIN] item is displayed on the LCD panel.

4 Use the jog dial (L) to adjust the [R] (red) gain, and use the jog dial (R) to adjust the [B] (blue) gain.

When the AW-CB400 is connected, these adjustments can also be performed using the [GAIN] dial.

33