Manual shooting

Manually adjusting the gain

There are two ways to adjust the gain. One way involves using the buttons on the wireless remote control or controller; the other way involves using the Camera Setting menu.

The gain can be adjusted more precisely using the Camera Setting menu. For further details, refer to the [Gain] item on page 47.

When performing the operations using the

accessory wireless remote control

1 Press the [OFF], [LOW] or [HI] button.

These buttons enable the gain increase to be selected in three steps.

2 If necessary, press the [AUTO] button in order to return the gain to the automatic adjustment (AGC).

When performing the operations

using the controller

When the AW-RP655 is connected:

1 Press the [GAIN] button and turn on the [MANU] lamp.

The preset gain increase amount is now selected.

For further details on the gain increase amount setting, refer to the Operating Instructions of the AW-RP655.

2 If necessary, press the [GAIN] button and turn on the [AUTO] lamp in order to return the gain to the automatic adjustment (AGC).

When the AW-RP555 is connected:

1 Press the [GAIN] button to turn off its lamp.

Each time this button is pressed, one of the three gain increase amounts can be selected in sequence.

The current status is displayed as follows.

 

[MANU]

[MANU]

[GAIN]

 

[L] button

[H] button

button

 

 

 

 

0 dB

Off

Off

Off

 

 

 

 

LOW

Lighted

Off

Off

 

 

 

 

HIGH

Off

Lighted

Off

 

 

 

 

AUTO

Off

Off

Lighted

2 If necessary, press the [GAIN] button several times and turn on its lamp in order to return the gain to the automatic adjustment (AGC).

When the AW-RP400/AW-CB400 is connected: (The following operations are performed using the AWCB400.)

1 Press the [0dB], [L], [M] or [H] [GAIN] button and turn on its lamp.

These buttons enable one of the four gain increase amounts to be selected.

The gain increase amounts can be set in the [L], [M] and [H] buttons.

For further details, refer to the Operating Instructions of the AW-CB400.

2 If necessary, press the [AGC] button and turn on its lamp in order to return the gain to the automatic adjustment (AGC).

In any case, the maximum gain of the automatic adjustment can be set by the menu.

For further details, refer to the [AGC Max Gain] item on page 47.

28

Page 28
Image 28
Panasonic AW-HE100N Manually adjusting the gain, Press the Gain button and turn on the Manu lamp, Button Off