Parts and their functions

Wireless remote control

1ON/STANDBY button

Each time this is pressed for two seconds, operation switches between turning on the unit’s power and establishing the standby status.

2Signal transmission window

3MENU button

Each time this is pressed for two seconds, operation switches between displaying the unit’s menu and exiting the menu.

4CAM1 to CAM4 buttons

These are used to select the units that are to be operated.

Once a button has been selected, the unit corresponding to the selected button can be operated.

5SET button

If this button is pressed for two seconds when the AWC A memory or AWC B memory is selected by the white balance adjustment, the black balance and white balance are automatically adjusted and registered in the memory currently selected.

6MODE button

This is used to select the video signals which are output from the unit.

Each time it is pressed, the signals are switched between the color bar signals and camera video signals.

7GAIN buttons [OFF] [LOW] [HI] [AUTO]

These are used to set the gain.

The gain increase can be set in three steps using the [OFF], [LOW] and [HI] buttons.

When the [AUTO] button is pressed, the AGC function is activated, and the gain is adjusted automatically depending on the light quantity.

The maximum gain of the AGC function can be set using the menu.

8Preset memory call buttons [1] to [12]

These are used to call the information on the unit’s directions and other settings, which have been registered in the unit’s preset memories No.1 to No.12, and reproduce those settings.

Settings in preset memories No.13 and above cannot be called from the wireless remote control.

12

Page 12
Image 12
Panasonic AW-HE100N operating instructions Wireless remote control