Panasonic AW-HE100N Black level total pedestal adjustment, Press the M/IRIS button

Black level (total pedestal) adjustment

Black level (total pedestal) adjustment

The black level can be adjusted when using a multiple number of cameras including the unit. Ask your dealer to perform this adjustment.

(Use an oscilloscope or waveform monitor for the adjustment.)

Adjust the black level in accordance with the units and devices used.

When performing the operations using the

accessory wireless remote control

When the accessory wireless remote control is used, the black level can be adjusted only when the user mode has been established.

1 Press the [M/IRIS] button.

Set the iris to the manual mode.

2 Press the [IRIS–] button.

The lens iris is stopped down.

3 Select the user mode following the steps in “Selecting the shooting modes (scene files)” (page 20).

At this time, keep the “User Mode Set” sub-menu on the display.

 User Mode Set 

Brightness Set

Color Set

G/L, Setup Set

Sharpness(DTL) Set

Other Set

Initialize

Return

4 Press the [] or [] button to make “Color Set” blink.

5 Press the [] or [] button.

The “Color Set” sub-menu is displayed.

 Color Set 
Chroma Level	+1
White Bal	AWC A
Pedestal	+1
Painting
R Gain	+1
B Gain	+1

Return

6 Press the [] or [] button to make the “Pedestal” value blink.

7 Press the [] or [] button to change the value.

Adjust the black level to a value of 5 IRE (0.035 V) or 7.5 IRE (0.050 V).

8 Press the [MENU] button for two seconds.

The menu display is exited.

9 If necessary, press the [A/IRIS] button to adjust the iris automatically.

35