Turn the jog dial main, Press the OK button

Selecting the shooting modes (scene files)

When performing the operations

using the controller

When the AW-RP655 is connected:

1 Press the [1], [2], [3], [4] or [5] button of [CONTROL/PREVIEW MONITOR OUT SEL].

2 Press the [MENU] button.

The display on the LCD panel of the AW-RP655 switches to the menu mode.

3 Turn the jog dial (main).

Display “CAMERA SETTING” on the LCD panel.

4 Press the [OK] button.

Display “OPEN CAMERA MENU?  OK Key” on the LCD panel.

5 Press the [OK] button again.

The main menu is displayed on the monitor.

6 Press the jog dial (main) to make “Camera

Setting” blink.

7 Turn the jog dial (main) counterclockwise.

Display the “Camera Setting” sub-menu on the monitor.

 Camera Setting 

Halogen

Fluorescent

Daylight

User

Return

8 Press the jog dial (main) to make the shooting mode blink.

Each time the jog dial (main) is pressed, the blinking item changes.

When the “Return” is made to blink and the jog dial (main) is turned counterclockwise, operation returns to the previous menu.

9 Turn the jog dial (main) counterclockwise.

The unit is now set to the shooting mode that is blinking, and a sub-menu is displayed.

 Halogen Mode Set 

Brightness Set

Color Set

G/L, Setup Set

Other Set

Initialize

Return

Example: Halogen mode

10 Press the [MENU] button or [R/B GAIN/

PED] button.

The menu display is exited.

When the AW-RP555 is connected:

1 Press the [1], [2], [3], [4] or [5] button of [CONTROL] to select the unit.

2 Press the [1], [2], [3] or [USER] button of [SCENE FILE] to select the shooting mode.

Shooting mode	[SCENE FILE] button
Halogen	[1]
Fluorescent	[2]
Daylight	[3]
User	[USER]

When the AW-RP400/AW-CB400 is connected: (The following operations are performed using the AW‑CB400.)

1 Press the [1], [2], [3], [4] or [5] button of [CONTROL SELECT] to select the unit.