Caller ID Service
–After the call is ended, the phone number of the caller, when reviewed from the Caller list, will be displayed in the same Format as the Edited Number.
For example, you can use this feature to set the unit to ignore the area code of callers in your area code, so that you can call these local numbers using caller information without dialing the area code.
To activate this feature, you must edit an item in the caller list, then call that number. After that, phone numbers from that caller’s area code are edited automatically. This feature can be turned on or off (page 52).
Note:
L Phone numbers from the 4 most recently edited area codes are automatically edited.
L If you move to another area, you can turn this feature off to erase previously edited area codes. To use this feature again, turn it on and reprogram the area codes you want to edit once again.
Editing a caller’s phone number before calling back
lN
You can edit a phone number in the caller list.
1{CID}
2{V}/{^}: Select the desired item. i
{EDIT}
3Add or erase digits to the beginning of the number as necessary.
L To add a digit, press the desired dial key.
L To erase a digit, press {CLEAR}.
4Press {CALL} or {IP}.
Note:
L{EDIT} is not displayed for A numbers. They are not necessary to be edited.
LThe edited phone number is not saved in the caller list.
Storing caller information into the handset phonebook N
1{CID}
2{V}/{^}: Select the desired item. L kTo edit the number, press
{EDIT} repeatedly until the phone number is shown in the desired format (page 44).
3{SAVE}
L To change the information, perform step 3, “Editing items in the handset phonebook”, page 40.
4{SAVE} i{OFF}
Erasing caller information N
Erasing a selected item
1{CID}
2{V}/{^}: Select the desired item.
3{ERASE} i{V}/{^}: “Yes” i
{SELECT} i{OFF}
Erasing all items
1{CID}
2{ERASE} i{V}/{^}: “Yes” i
{SELECT}
For product assistance, visit www.panasonic.com/help | 45 |
For Aassistance, visit www.joip.com |
|
