How to Use the On Screen Menu  (continued)

Picture adjusting menu

1.Turn the rotary knob to select a menu item and press the rotary knob.

•The menu closes and the set values of the selected menu item appears.

[PICTURE]

SETTING[USER2]

PEAKING PHASE

CHROMA

BRIGHT

CONTRAST

BACKLIGHT F-IN-R

MENU EXIT

[PHASE] 30

MENU EXIT RETURN RETURN

Name

Function

Adjustable range

( ): Factory default

 

 

PEAKING

PEAKING

0 to 30 (0)

PHASE

PHASE

0 to 60 (30)

CHROMA

CHROMA

0 to 60 (30)

BRIGHT

BRIGHT

0 to 60 (30)

CONTRAST

CONTRAST

0 to 60 (50)

BACKLIGHT

BACKLIGHT

0 to 100 (80)

F-IN-R

FOCUS-IN-RED

0 to 30 (30)

The text color of set values that are factory defaults is green and other values are white.

Set values are loaded when the monitor is turned on. How- ever, operations and changes cannot be made in the following conditions.

•When the control lock is on, the key mark () appears and set values cannot be changed. (→page 41)

•When the MONO function is ON, [PHASE] and [CHROMA] operations are disabled. (→page 26)

•F-IN-R is enabled during operation of the FOCUS-IN-RED function.

•While operating HV DELAY (→page 30) (when set to any other setting than OFF), [BRIGHT] operation is disabled.

•The “CONTRAST” and “BACK LIGHT” operations are dis- abled in BLACK MODE.

2.Turn the rotary knob to select a set value and press the rotary knob.

•The set value is confirmed and the menu reappears.

•To cancel, press [RETURN] before pressing the rotary knob.

[PHASE] 20

MENU EXIT RETURN RETURN

[PICTURE]

SETTING[USER2]

PEAKING

PHASE * CHROMA BRIGHT CONTRAST BACKLIGHT F-IN-R

MENU EXIT

•A mark (*) appears beside menu names whose picture adjustments (PEAKING/CHROMA/PHASE/BRIGHT/ CONTRAST/BACKLIGHT) have been changed from the values assigned using “SETUP LOAD” or “POWER ON SETUP”.

Audio volume

•For details on how to display the audio volume, refer to “Audio volume display” (→page15)

1.Turn the rotary knob to select a set value.

[VOLUME] 30

MENU EXIT

•Set value is confirmed when it is changed.

•Changing the audio volume when audio output is muted (“AU- DIO MUTE” (→page30)) immediately cancels AUDIO MUTE.

• is displayed when audio output of the monitor is muted.

•Audio volume is always available and is not affected by the “CONTROL” menu (→page 41)

•The adjustment range is 0 to 60 (the factory default is 0)

19