Main menu  (continued)

Sub menu

Settings

 

Description

POWER ON SETUP

LAST

Selects the settings used when the power is turned on.

 

FACTORY

<LAST>

Starts in the mode used when the power was last turned off.

 

USER1

<FACTORY>

Starts up using the factory defaults.

 

USER2

<USER1 - 5> Starts up using USER registered settings.

 

USER3

 

 

 

USER4

 

 

 

USER5

 

 

 

 

 

COLOR SPACE

SMPTE-C *4

Sets the studio standard color space.

 

EBU *5

 

 

 

ITU-709 *6

 

 

POWER DOWN

OFF

Determines whether or not the power will be turned off (power down) when there is no

 

ON

signal input and the unit has been idle for a certain period of time.

 

 

<OFF> The unit is not powered down.

 

 

<ON> The unit is powered down.

POWER SAVE

OFF

Sets the power save mode.

MODE

ON

<OFF> POWER SAVE MODE is not engaged.

 

 

<ON> The backlight dims when no signal (NO SIGNAL) is input for 60 seconds or longer.

 

 

Signal input or menu operation will return the backlight to its normal brightness.

 

 

 

CALIBRATION

▼

Connect Display Color Analyzer CA-310 and then perform calibration. This also allows you

 

 

to restore the calibration data to the factory preset setting values. (→pages 28 to 30)

*4 Factory default setting for the BT-LH1850P. *5 Factory default setting for the BT-LH1850E. *6 ITU-709 indicates the ITU-R BT.709 standard.

„„INPUT NAME SETUP

The “INPUT NAME SETUP” function allows you to change the names of the input lines (VIDEO, SDI1, SDI2, HDMI, DVI-I (YPBPR/ RGB-COMP./DVI-VIDEO/DVI-COMP.), INT-SG) that are displayed in status or other indications.

1.Turn the rotary knob in the “SYSTEM CONFIG” menu to select the “INPUT NAME SETUP” submenu and press the rotary knob.

2.Turn the rotary knob to select the name of the input line you want to change and press the rotary knob.

[INPUT NAME SETUP]

VIDEO

 

VIDEO

SDI1

 

SDI1

SDI2

 

SDI2

HDMI

 

HDMI

YPBPR

 

YPBPR

RGB-COMP.

RGB-COMP.

DVI-VIDEO

DVI-VIDEO

DVI-COMP.

DVI-COMP.

INT-SG

 

INT-SG

MENU EXIT

SEL.

 

ENTER RETURN RETURN

 

3.Turn the rotary knob to select the characters you want to change*7 and press the rotary knob to enter them.

•The selected characters are highlighted and change to italics when entered.

 

[INPUT NAME SETUP]

 

 

VIDEO

 

VIDEO

 

 

SDI1

 

SDI1

re

 

SDI2

 

DI2

 

 

set

 

HDMI

 

HDMI

 

 

YPBPR

 

YPBPR

 

 

RGB-COMP.

RGB-COMP.

 

DVI-VIDEO

DVI-VIDEO

 

DVI-COMP.

DVI-COMP.

 

INT-SG

 

INT-SG

 

MENU EXIT

SEL.

ENTER

RETURN RETURN

 

 

 

 

 

*7 The “B” and “R” in YPBPR cannot be selected.

4.Turn the rotary knob to enter the characters and press the rotary knob to confirm them.

•After entering all display characters, select and press the rotary knob to confirm them.

 

[INPUT NAME SETUP]

 

 

 

 

 

VIDEO

 

VIDEO

 

 

 

 

 

SDI1

 

SDI1

 

 

 

 

 

SDI2

 

AAAA

 

 

re

 

 

 

 

 

set

 

 

HDMI

 

HDMI

 

 

 

 

 

YPBPR

 

YPBPR

 

 

 

 

 

RGB-COMP.

RGB-COMP.

 

DVI-VIDEO

DVI-VIDEO

 

DVI-COMP.

DVI-COMP.

 

INT-SG

 

INT-SG

 

MENU EXIT

SEL.

ENTER

RETURN RETURN

 

 

 

 

 

 

 

 

• Selecting re and pressing the rotary knob cancels the en-

set

tered characters and returns them to their default values.

•To cancel a setting, press RETURN before pressing the ro- tary knob to set the display characters.

„„CALIBRATION

The CALIBRATION function in this unit measures LCD panel characteristics from low to high brightness values and internal monitor processing handles CALIBRATION.

CALIBRATION does not rely on image quality settings since internal signals are used for a calibration. CALIBRATION in this unit is made at D65 color temperature and other color temperatures are results calculated automatically from this value.

28