Error and Warning Displays
If for any reason an error occurs in the monitor, the following indications are made to notify the error or warning.
Error and Warning Displays | Displayed information | Remedy |
Warning of drop in external DC | A “LOW VOLTAGE” indication in blue | If the power goes off, connect an external DC |
input voltage/LOW VOLTAGE | flashes on the screen. | power supply providing 11.0 V or more and set |
| This means that the external DC power | the POWER switch to ON. |
| supply input voltage has dropped to |
|
| approximately 11.3 V or less. |
|
|
|
|
| The “LOW VOLTAGE” indication lights red |
|
| on the screen and the power is turned off |
|
| approximately 4 seconds later. |
|
| This means that the external DC power |
|
| supply input voltage has dropped below |
|
| approximately 11.0 V. |
|
Maintenance
•To clean the cabinet or surface of the liquid crystal panel, gently wipe with a soft, dry cloth.
If the surfaces are extremely dirty, use a soft cloth dipped in a weak detergent solution and then
•Never use alcohol, thinner or benzene to clean this unit.
Doing so would cause the surface of the monitor to become discolored, and cause paint to peel.
•Do not spray cleansers directly onto the monitor.
Water or similar substances getting inside the monitor can cause a malfunction.
51