User Data
This unit can save up to five combinations of set values for main menu and screen adjustments made in the picture adjusting menu as user data that can be recalled. You can also return settings and adjustments to their factory defaults.
User data include the following settings.
•Menu settings except “SETUP LOAD/SAVE” and “REMOTE in CONTROL” (including button function settings on the monitor front panel)
•Screen adjustments made with the picture adjusting knob
Saving user data
1.Press [MENU] to display the main menu.
2.Turn the rotary knob to select the “SYSTEM CONFIG” menu and press the rotary knob.
3.Turn the rotary knob to select the “SETUP SAVE” sub- menu and press the rotary knob.
The setting in the sub menu changes to green.
| [SYSTEM CONFIG] |
|
|
|
|
| |||
| SUB WINDOW |
| FULL |
| |||||
| MENU POSITION | CENTER |
| ||||||
| STATUS DISPLAY | 3SEC OFF |
| ||||||
| INPUT NAME SETUP |
| |
| |||||
| SETUP LOAD |
| FACTORY |
| |||||
| SETUP SAVE |
| USER1 |
|
|
| |||
|
|
|
|
| |||||
| POWER ON SETUP |
| LAST |
|
|
| |||
| COLOR SPACE |
| EBU |
|
| ||||
| POWER DOWN |
| OFF |
|
| ||||
| POWER SAVE MODE |
| OFF |
|
| ||||
| CALIBRATION |
| |
|
| ||||
| MENU EXIT | SEL. | ENTER | RETURN RETURN |
|
| |||
|
|
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
|
| |
|
|
|
| Changes to green |
| ||||
4.Turn the rotary knob to select settings to save from the “USER1” to “USER5” and press the rotary knob.
The following screen appears.
[SETUP SAVE]
USER1
YES
NO
MENU EXIT | SEL. | ENTER RETURN RETURN |
5.Select “YES” and press the rotary knob. This saves the user data.
6.To return to the previous screen, press [RETURN].
Loading user data
1.Press [MENU] to display the main menu.
2.Turn the rotary knob to select the “SYSTEM CONFIG” menu and press the rotary knob.
3.Turn the rotary knob to select the “SETUP LOAD” sub- menu and press the rotary knob.
The setting in the sub menu changes to green.
| [SYSTEM CONFIG] |
|
|
|
| |||
| SUB WINDOW |
| FULL | |||||
| MENU POSITION |
| CENTER | |||||
| STATUS DISPLAY | 3SEC OFF | ||||||
| INPUT NAME SETUP |
| |
| ||||
| SETUP LOAD |
| FACTORY |
|
| |||
| SETUP SAVE |
| USER1 |
|
| |||
| POWER ON SETUP |
| LAST |
| ||||
| COLOR SPACE |
| EBU |
| ||||
| POWER DOWN |
| OFF |
| ||||
| POWER SAVE MODE |
| OFF |
| ||||
| CALIBRATION |
| |
| ||||
| MENU EXIT | SEL. | ENTER |
| RETURN RETURN |
| ||
|
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
| |
|
|
|
| Changes to green | ||||
4.Turn the rotary knob to select settings to load from the “USER1” to “USER5” and press the rotary knob.
The following screen appears.
• To return to the factory default, select “FACTORY.”
[SETUP LOAD]
USER1
YES
NO
MENU EXIT | SEL. | ENTER RETURN RETURN |
5.Select “YES” and press the rotary knob. This loads the user data.
6.To return to the previous screen, press [RETURN].
20