Main menu  (continued)

RESET operation

1.Turn the rotary knob in the “SYSTEM CONFIG” menu to select the “CALIBRATION” submenu and press the rotary knob.

2.Turn the rotary knob to select the “RESET” submenu and press the rotary knob.

[RESET]

YES

NO

MENU EXIT

SEL.

ENTER RETURN RETURN

3.Select “YES” and press the rotary knob. This starts calibration.

[RESET]

xxxxxxxxx

MENU EXIT

SEL.

ENTER RETURN RETURN

xxxxxxxxx indicates that the following message with the mean- ing listed below appears.

COMPLETE: Operation completed

4.Turn the power off and then on after performing reset op- eration.

FUNCTION

 

 

The underlined values are factory preset setting values.

 

 

 

Sub menu

Settings

Description

FUNCTION 1 -

HV DELAY

Selects functions to be assigned to [FUNCTION1] - [FUNCTION5] (front panel

FUNCTION 5

BLUE ONLY

buttons) or the FUNCTION menu.

 

GAMMA SELECT

<HV DELAY> *1

 

SD ASPECT

Displays the image blanking period.

 

SCAN

The display changes in the following order.

 

SUB WINDOW

DELAY OFF → H DELAY → V DELAY → HV DELAY → DELAY OFF

 

WFM/VECTOR

<BLUE ONLY> *1

 

MARKER

Cuts the red and green signals. Use this function to check phase and chroma. This

 

WHITE BALANCE

button toggles between ON and OFF.

 

PIXEL TO PIXEL

<GAMMA SELECT>*2*3

 

PIXEL POSITION

Selects the gamma curve.

 

FOCUS-IN-RED

The display changes in the following order.

 

LEVEL METER

GAMMA STANDARD → GAMMA FILM → GAMMA STDIO/PST →

 

CROSS HATCH

GAMMA STANDARD

 

MONO

<SD ASPECT> *2*3

 

BLACK MODE

Switches between “16:9” and “4:3.”

 

TIME CODE

<SCAN> *2*3

 

CLOSED CAPTION

Switches between “UNDER SCAN” and “NORMAL SCAN”.

 

AUDIO MUTE

<SUB WINDOW> *1

 

UNDEF

Sets the split-screen function.

 

 

The display changes in the following order.

 

 

SINGLE → FULL/PART → STILL → SINGLE

 

 

<WFM/VECTOR> *2

 

(Factory defaults

Displays waveform or vector display.

 

FUNCTION1:

For details on the available operation items, refer to page 33.

 

MARKER

<MARKER> *2*3*4

 

FUNCTION2: WFM/

Turns the marker on and off.

 

VECTOR

For details on the available operation items, refer to page 33.

 

FUNCTION3: PIXEL

<WHITE BALANCE>

 

TO PIXEL

WHITE BALANCE GAIN/BIAS RGB direct adjustment can only be accessed when

 

FUNCTION4: TIME

VAR1 to VAR3 are selected in COLOR TEMP.

 

CODE

<PIXEL TO PIXEL>

 

FUNCTION5: LEVEL

Turns the PIXEL TO PIXEL function On and Off.

 

METER)

<PIXEL POSITION>

 

 

Positions the display of signals in PIXEL TO PIXEL mode.

 

 

 

*1 The settings are cancelled when the power is turned OFF.

*2 If these settings are changed, the menu settings will also change. *3 The control settings do not operate during GPI operation.

*4 Not displayed when “16:9”, “4:3” and “CENTER” are all “OFF” in the MARKER menu settings.

30