Panasonic BT-LH1850E, BT-LH1850P 38

Main menu (continued)

INPUT SELECT

				The underlined values are factory preset setting values.

Sub menu	Settings			Description
VIDEO	AUTO	Selects the VIDEO input format. *1
	NTSC	<AUTO>	Automatically selects NTSC or PAL.
	PAL	<NTSC>	NTSC
		<PAL>	PAL

NTSC SETUP	00	Selects NTSC setup level.
	75	<00> Select this when the signal is at a 0 IRE setup level.
		<75> Select this function when using 7.5 % setup signals.
		(The unit internally adjusts the 7.5 % setup level to suit the black level)
DVI-I	DIGITAL	Selects DVI-I input mode.
	ANALOG	<DIGITAL>		Selects digital input.
		<ANALOG>		Selects analog input.

DIGITAL	AUTO	Selects a DVI-I digital input mode.
	VIDEO	<AUTO>	Selects the input mode automatically depending on the input format.
	COMP.	<VIDEO> Selects component input.
		<COMP> Selects PC input.

ANALOG	YPBPR	Selects YPBPR (component) or RGB input mode when DVI-I is set to ANALOG.
	RGB-COMP.	<YPBPR>		Selects YPBPR signals
		<RGB-COMP> Selects the PC RGB signal.

COMPONENT	SMPTE	Selects the YPBPR (component) signal input level of DVI-I analog inputs.
LEVEL	B75	<SMPTE>		Signal level complies with SMPTE and PB and PR are 0.7 V [p-p] at 100 %
	B00			chroma.
		<B75>		Select this when connecting a Betacam or similar device with a setup function.
		<B00>		(The unit internally adjusts the 7.5 % setup level to suit the black level)
		<B00>		Select this when connecting a Betacam or similar device without a setup function.
RGB-COMP.	▼	Performs analog PC settings. (This page)

*1 “AUTO” is the factory default, but select an appropriate format when there is risk that the input signal may be contaminated by outside noise.

RGB-COMP.

Selecting “ANALOG.” under “DVI-I” in the “INPUT SELECT” menu and selecting “RGB-COMP.” under “ANALOG” opens the following menu.

		The underlined values are factory preset setting values.

Sub menu	Settings	Description
H POSITION	0 to 60	Adjusts horizontal image display position in 2-clock units.*2
	(Factory default setting: 30)
V POSITION	0 to 15	Adjusts vertical image display position.*2
	(Factory default setting: 8)
PHASE	0 to 31	Adjusts the clock phase in 1/32 clock period increments.*2
	(Factory default setting: 16)
CLOCK	700 to 1900	Adjusts the sampling clock in 2 clock units.*2
	(Factory default setting*3)
WXGA H SAMPLE	1280	Select a WXGA format.
	1366	<1280> Select a 1280 x 768 format.
		<1366> Select a 1366 x 768 format.
RESET		Returns H POSITION, V-POSITION, PHASE and CLOCK settings in the
		RGB-COMP. input compliant format to their factory defaults.

*2 Each (compatible) input format can be adjusted but not when user data is loaded (→page27 “SETUP LOAD”) or saved (→page27 “SETUP SAVE”)

*3 “CLOCK” factory default