135
Disabling/Enabling Wireless Communication
3Select the setting you want to assign to the wireless switch.
[Selects the device for which to turn the device status on each time with the dialog box.]
Display a dialog each time you set the Wireless switch to ON so you can choose which wi reless device to enable.
[Turns on the following device.]
Only selected devices are enabled when you set the Wireless switch to ON.
[Turns on the device that was on immediately before the wireless switch was turned off the last time.]
(default)
When you turn on the wireless switch, the on/off settings that were selected w hen you last turned off the wireless
switch will be restored.
4Click [OK].

To check the wireless communication status

1
Click on the notification area and place the cursor over the Wireless Switch Utility icon.
Place the cursor over the Wireless Switch Utility icon on the notification area.
NOTE
Do not turn on/off the switch repeatedly at too short intervals.
Do not restart, log off, or enter sleep or hibernation immediately after turning on/off the switch.
Do not turn on/off the switch while Windows is starting up.
To use wireless communication, set the wireless devices ([Wireless LAN] / [Bluetooth] / [Wireless WAN]) to [Enable d]
(default) in the [Advanced] menu of the Setup Utility.
It may take some time to turn off wireless communication after switching the wireless switch off.
If the IEEE802.11a setting is changed in [Device Manager], the display will be changed accordin gly.
You can automatically disable the wireless LAN connection when a LAN cable is connected to your comput er. You need to
install the Wireless Connection Disable Utility to use this function.

Installing the utility

1Log on to Windows as an administrator.
Wireless Connection Disable Utility
Windows 7
Windows XP
Windows XP