176
Troubleshooting (Advanced)
Click [Start] - [Control Panel] - [Performance and Maintenance] - [System] - [Hardware] - [Device Manager].
BDouble-click [PCMCIA adapters], and double-click the relevant devi ce.
In [Resources], if [Conflicting device list] shows [No conflicts], there is no conflic t.
Read the instructions supplied with the PC Card, or consult the PC Card m anufacturer.
Check that you are using a driver supported by the operating system.
You do not know the available RAM module
Refer to “Expanding Memory” ( page 93).
Microsoft Windows Logo Authentication is not obtained
If “This driver is not digitally signed!” message is displayed, the driver you attempt to install may not have obtained
Microsoft Windows Logo Authentication. Consult the peripheral manufactu rer.
To check if the additional RAM module has been installed successfully
If the installation is successful, the main memory and total RAM module size appears in the [Inf ormation] menu of the
Setup Utility ( page 149).
If the RAM module is not confirmed:
• Turn the computer o ff and reinsert the RAM module.
• Confir m the recommended specifications.
Regarding the RAM module, refer to “Expanding Memory” ( page 93).
The address map for IRQ, I/O port address, etc. is unclear
You can check with the following procedure.
A
Click (Start) - [Computer] - [System properties] - [Device Manager].
Click [start] - [Control Panel] - [Performance and Maintenance] - [System] - [Hardware] - [Device Manager].
BClick [View] - [Resources by type].
Windows XP
Windows 7
Windows XP