60
Sleep/Standby or Hibernation Functions
The sleep/ standby or hibernation functions allow you to shut off the computer without closing
programs and documents. You can quickly return to the programs and documents that you were working on before s leep or
hibernation.
Sleep
1Click or on the notification area, and click [More power options] - [Change when
the computer sleeps].
2Select the setting for [Put the computer to sleep:], and then click [Save changes].
The setting for hibernation may change unexpectedly when you change the setting for sleep. Confirm that the
time to enter hibernation is 1,080 minutes (default setting) or longer (below).
Hibernation
1After the step 1 of “Sleep” setting (above), click [Change advanced power settings].
2Double-click [Sleep], and double-click [Hibernate after].
3Click the item and select the setting.
4Click [OK].

Starting Up Your Computer Quickly

Function Data is saved to Recovery time Power supply
Sleep
Standby
Memory Short Required. (If power is not supplied, all data will be lost.)
Hibernation Hard disk Rather long Not required. (Howev er power is slightly consumed to
keep the hibernation.)

Setting Sleep/Standby or Hibernates

Windows 7 Windows XP
Windows 7
Windows XP
Windows 7