101
External Display
NOTE
After resuming from sleep/ standby or hibernation, or restarting the computer, the output
destination may not be the same as the one selected in the previous status.
When you change the display after Windows starts up, do not press any key until switching is complete.
Display switching by pressing +
P
or
Fn
+
F3
/
Fn
+
F3
may not work when you use the
Fast User Switching function to switch the user. In this case, log off all users and restart the com puter.
Do not connect or remove the external display during sleep / standby or hibernation.
It may take some time to switch between displays depending on the displays used.
Use the [Intel® Graphics and Media Control Panel] screen to set the color depth, resol ution and refresh rate.
When you change the output destination after Windows starts up, do not press any key until switching is complete.
You cannot use the simultaneous display until Windows starts up.
Simultaneous display and display switching do not work when [Command Prom pt] screen is set to “Full
Screen”.
When you use the external display only, set the suitable number of colors, resolution, or refresh rate s eparately from
when you use the internal LCD only or when you use the simultaneous display.
Depending on the settings, some external displays may be dist orted or may not display the mouse cursor correctly. In
this case, set the settings to lower value.
When you use the simultaneous display, DVD-Video, MPEG files and other motion image files may not b e played back
smoothly.
Carefully read the instruction manual of the external display.
When connecting an external display that does not conform to the Plug & Play standards, select the display driver
accordingly in the following menu, or use the driver disc supplied with the m onitor.
A Click (Start) - [Control Panel] - [Adjust screen resolution] - [Advanced Settings] - [Monitor] -
[Properties].
A standard user needs to enter an administrator password.
[start] - [Control Panel] - [Appearance and Themes] - [Display] - [Settings] - [Advanced] - [Monitor] -
[Properties].
BClick [Driver] - [Update Driver].
If a picture is not displayed normally, lower the level of [Hardware acceleration] in the followin g menu.
[start] - [Control Panel] - [Appearance and Themes] - [Display] - [Settings] - [Advanced] - [Troubleshoot]
When an external display is connected to an optional port replicator, the display swit ching may work differently form
the above. For further information, refer to the instruction manual of the port replicator.
<CF-S9 Series>
If the HDMI display does not support connection to a personal computer, the screen may appear b lurry, or the output
destination may not be changed by pressing +
P
or
Fn
+
P
.
Windows 7 Windows XP
Windows 7 Windows XP
Windows 7 Windows XP
Windows XP
Windows 7
Windows XP
Windows XP