140
Wireless LAN
Setting the wireless LAN access point
Preparation
Follow the instruction manual of the wireless LAN access point to make settings for the access point to recognize the computer.
1Turn the wireless LAN on.
2Click or on the notification area.
3Select an access point, and click [Connect].
4Input the key you set for the access point to recognize the computer, and click [OK].
Wait for the computer to connect to the wireless LAN access point.
When the icon on the notification area is changed to , the wireless LA N setting is complete.
5Click [Close].
NOTE
The settings depend on the network environment. For further information, as k the system administrator or the person
in charge of the network.
If you use the stealth type wireless LAN access point which restricts automatic detection of the wireless LAN access
point, take the following procedure.
If you do not perform the procedure below, you may not be able to access the wireless LA N access point automatically
or the wireless LAN access point may not be displayed on the [Connect to a network] screen.
AClick , or on the notification area, click [Open Network and Sharing Center] - [Set up a new connecti on or
network] - [Manually connect to a wireless network] and click [Next].
BInput necessary information and add check marks for [Start this connection automatically ] and [Connect even if the
network is not broadcasting] and click [Next].
Windows 7