195
Intel® Active Management Technology
ESelect [Intel(R) ME General Settings] and press
Enter
.
FSelect [Activate Network Access] and press
Enter
.
GPress
Y
on the [Caution] screen.
HSelect [Previous Menu] and press
Enter
.
ISelect [Intel(R) AMT Configuration] and press
Enter
.
JPress
Enter
.
KSelect [SOL/IDER] and press
Enter
.
Change other settings as necessary.
LSelect [SOL] and press Enter and then set to [ENABLED] and press
Enter
.
MSelect [IDER] and press Enter and then set to [ENABLED] and press
Enter
.
NSelect [Previous Menu] and press
Enter
.
OSelect [KVM Configuration] and press
Enter
.
PSelect [KVM Feature Selection] and press
Enter
and set to [ENABLED].
QSelect [Previous Menu] and press
Enter
.
RSelect [Previous Menu] and press
Enter
.
NOTE
You can use the following characters to set Intel(R) ME Password.
• Minim um of 8 and maximum of 32 characters are used.
• 1 or m ore numeric characters are included.
• 1 or mor e special characters (example: “!” “$”) are included (only characters that can be d isplayed with the US
keyboard).
• Capital le tters and small letters are mixed.
When you are entering your password, the software recognizes the keyboard as a US ke yboard. As a result,
depending on the keyboard you are using, different characters (unintended charac ters) may be entered for certain
keys.
The following table shows some examples.