Recording

[i.Exposure]

Applicable modes:

Contrast and exposure will be adjusted automatically when there is a big difference in brightness between the background and subject, to bring the image close to real life.

Settings: [ON]/[OFF]

[ ] in the screen turns to yellow when [i.Exposure] is in effect.

Even when the [Sensitivity] is set to [100], [Sensitivity] may be set higher than [100] if the picture is taken with [i.Exposure] set to valid.

Compensation effect may not be achieved depending on the conditions.

[Min. Shtr Speed]

Applicable modes:

You can take bright pictures in dark places by setting [Min. Shtr Speed] slower. Also, you can set it faster to reduce the blur of the subject.

Settings: [AUTO], [1/125], [1/60], [1/30], [1/15], [1/8], [1/4], [1/2], [1]

Minimum shutter speed setting

[1/125]

[ 1 ]

Brightness

Darker

Brighter

Jitter

Less

More

This should usually be set to [AUTO] to take pictures. (When you select a minimum shutter speed other than [AUTO], [ ] appears on the screen.)

Depending on the [Sensitivity] setting, the shutter speed may be limited to the fast ones.

When [AUTO] is selected, shutter speed may be set up to 1 second when there is not much jitter to adjust with the [Stabilizer], or when [Stabilizer] is set to [OFF].

Setting [Min. Shtr Speed] to slower speed might increase the chance of jitter, so we recommend using a tripod and the self-timer for taking pictures.

Setting [Min. Shtr Speed] to faster speed might make the picture darker, so we recommend recording the picture in well-lit area. If correct exposure cannot be achieved, [ ] will flash in red when the shutter button is pressed halfway.

- 109 -

Page 109
Image 109
Panasonic DMC-FT5/DMC-TS5 operating instructions 109, Exposure, Min. Shtr Speed