Panasonic DMC-FT5/DMC-TS5 operating instructions 130

GPS/Sensor

∫Using a card reader/writer (commercially available) Preparation:

Close all other running applications. Insert the card into the unit.

1Select [Assist Data] on the [GPS/Sensor] menu, and then press [MENU/ SET].

2

3

Press 3/4 to select [Update], and then press [MENU/SET].

Press 3/4 to select [SD card], and then press [MENU/SET].

•The “GPS Assist Tool” is copied to the card.

4

5

6

7

Turn this unit off and remove the card.

Insert the card into the card reader/writer (commercially available) that is connected to the PC.

Launch the “GPS Assist Tool” with the PC.

For Windows:

Double-click [GPSASIST.EXE] stored in the [AD_LUMIX] folder of the card. For Mac:

1Double-click [GPSASIST.DMG] stored in the [AD_LUMIX] folder of the card.

2Double-click [GPSASIST].

Click [Update] on the screen of the PC.

•Proceed with the steps according to messages appearing on the PC. When the update is complete, click [Exit].

•Do not disconnect the unit from the PC until the data has been updated.

8

9

Remove the card.

Insert the card into this unit and turn the unit on.

•The GPS assist data of this unit is updated.

- 130 -