Connecting to other equipment

Disconnecting the USB connection cable safely

Select the [] icon in task tray displayed on the PC, and then click [Eject DMC-XXX] (XXX varies by model).

Depending on your PC’s settings, this icon may not be displayed.

If the icon is not displayed, check that [Access] is not displayed on the LCD monitor of the digital camera before removing the hardware.

Connection in the PTP Mode Set [USB Mode] to [PictBridge(PTP)].

Data can now be read only from the card into the PC.

When there are 1000 or more pictures on a card, the pictures may not be imported in the PTP Mode.

Motion picture cannot be played back in PTP Mode.

- 224 -

Page 224
Image 224
Panasonic DMC-FT5/DMC-TS5 operating instructions 224, Connection in the PTP Mode Set USB Mode to PictBridgePTP