Basic

[Reset Wi-Fi Settings]

Reset all settings in the [Wi-Fi] menu to factory default settings.¢

Always reset the camera when disposing or selling it to prevent personal information saved within the camera from being misused.

Always reset the camera after making a copy of personal information when sending the camera in to

be repaired.

¢(Excluding [LUMIX CLUB]) (P209)

x[USB Mode]

Select the USB communication system after or before connecting the camera to your PC or your printer with the USB connection cable (supplied).

Updates GPS assist data when connected to a PC.

[y] ([Select on connection]):

Select either [PC] or [PictBridge(PTP)] if you connected the camera to a PC or a printer supporting PictBridge.

[{] ([PictBridge(PTP)]):

Set after or before connecting to a printer supporting PictBridge.

[z] ([PC]):

Set after or before connecting to a PC. [ ] ([GPS assist data]):

Set this when connecting to a PC and updating GPS assist data.

[Output]

Set to match the colour television system in each country or the type of TV.

[] ([Video Out]): [NTSC]:

Video output is set to NTSC system.

[PAL]:

Video output is set to PAL system.

This will operate when the AV cable (optional) or HDMI micro cable (optional) is connected.

[ ] ([TV Aspect]): [W]:

When connecting to a 16:9 screen TV. [X]:

When connecting to a 4:3 screen TV.

This will work when the AV cable (optional) is connected.

- 59 -

Page 59
Image 59
Panasonic DMC-FT5/DMC-TS5 Video Out Ntsc, Video output is set to Ntsc system, Pal, Video output is set to PAL system