GPS/Sensor

Update the GPS information

When the displayed location name information is different from the current location or when the positioning is not successful, move to a location where the radio waves from GPS satellites can be received better and perform the positioning update.

When significant time has elapsed since the last successful positioning ([], [], [] and [ ] are displayed), we recommend performing a positioning update.

Select [Repositioning] on the [GPS/Sensor] menu, and then press [MENU/ SET].

Positioning is started and the current location information is updated once the positioning is successful.

Checking the GPS reception status before updating

1Select [GPS Setting] on the [GPS/Sensor] menu, and then press [MENU/SET].

2Press 3/4 to select [INFO] and then press [MENU/SET].

Last updated positioning result is displayed.

[ ] Time positioning was performed

[ ] Number of GPS satellites received from

[

]

Latitude

Longitude

3Press [MENU/SET] in the information confirmation screen.

Positioning is started and the current location information is updated once the positioning is successful.

About automatic updating of positioning

Even if you do not perform [Repositioning], it will perform the positioning automatically right after this unit is turned on, and in constant time intervals.

When [GPS Setting] is set to [ON], the unit will continue to perform the positioning at a constant time interval even if this unit is turned off. Note that if [Airplane Mode] has been set to [ON], positioning will not be performed when this unit is turned off.

Positioning with this unit turned off is cancelled in the following cases:

When the remaining battery power becomes []

When this unit is not turned on for a specific period of time

- 125 -

Page 125
Image 125
Panasonic DMC-FT5/DMC-TS5 125, Update the GPS information, Press MENU/SET in the information confirmation screen, Latitude