Panasonic DMC-FT5/DMC-TS5 operating instructions 139, Adding an altimeter log

GPS/Sensor

Adding an altimeter log

The altitude is recorded at 15 minute intervals and displayed as a graph.

•Set the date and time settings in advance. (P28)

•It cannot be recorded into the built-in memory. Please use a card.

1Select [Altimeter] on the [GPS/Sensor] menu, and then press [MENU/ SET].

2

3

Press 3/4 to select [Logging], and then press [MENU/SET].

Press 3/4 to select [ON], and then press	2000m
[MENU/SET].

	0m
A Altimeter log 12 hours before	-12H
B Latest altimeter log	A	B

•Press [DISP.] several times on the recording standby

screen until the altitude graph display screen appears. You can view a graph of the altimeter log for the last 12 hours.

The period up to when the [Logging] is set to [OFF] is saved as a single log file.

In the following cases, even if [Logging] is not set to [OFF], the record of the altitude as a single log file will be interrupted.

•When the time settings are changed (including [Auto Clock Set])

•When the [World Time] setting is changed

•When the battery remaining is []

•When there is insufficient space on the card

•In the following cases, altitude is not recorded.

–When [Airplane Mode] is set to [ON] and this unit is turned off

–When [Sensor Settings] is set to [OFF]

–Beach & Snorkeling Mode

–Advanced Underwater Mode

–When using [Time Lapse Shot]

–When connecting to a PC or a printer

–When recording motion pictures

- 139 -