Wi-Fi

How to Use the [Wi-Fi Setup] Menu

For details on how to select the [Wi-Fi] menu settings, refer to P48.

Configure the settings required for the Wi-Fi function. [Wi-Fi Setup] cannot be changed when connected to Wi-Fi.

1Select [Wi-Fi Setup] in the [Wi-Fi] menu, and press [MENU/SET]. (P48)

2Press 3/4 to select item, and press [MENU/SET].

[LUMIX CLUB]

Acquires or changes the “LUMIX CLUB” login ID.

 

 

Refer to P206 for details.

[PC Connection]

You can set the workgroup.

To send images to a PC, a connection to the same workgroup as the destination PC is required.

(The default setting is “WORKGROUP”.)

[Change Workgroup Name]:

Enter the workgroup of the connecting PC. Close the menu after changing settings.

[Restore to Default]: Restores the default state.

Confirmation screen is displayed. It is executed when [Yes] is selected. Exit the menu after it is executed.

For details on how to enter characters, refer to Entering Textsection on P94.

If you are using the PC with standard settings, you do not need to change the workgroup.

[Device Name]

You can change the name of this unit.

1Press [DISP.].

2Enter the desired device name.

Refer to Entering Text(P94) for information on how to enter text.

Up to 32 characters can be entered for [A], [a], [1], and [&].

[External AV device]

Images can be sent to the AV device of relatives and acquaintances via “LUMIX CLUB”.

Refer to P210 for details.

[NFC Operation]

Configures the settings for the NFC function.

[ON]:

NFC function is worked.

[OFF]

It is initially set to [ON] on the camera.

- 211 -

Page 211
Image 211
Panasonic DMC-FT5/DMC-TS5 operating instructions How to Use the Wi-Fi Setup Menu, 211