Others

Taking pictures using Auto Bracket is not possible.

Is there any memory remaining on the built-in memory or the card?

The recorded picture looks rough.

Noise appears on the picture.

Is the ISO sensitivity high or the shutter speed slow?

(ISO sensitivity is set to [AUTO] when the camera is shipped. Therefore, when taking pictures indoors etc. noise will appear.)

>Decrease the ISO sensitivity. (P98)

>Take pictures in bright places.

Has [High Sens.] in the Scene Mode been set? If so, the resolution of the recorded picture decreases slightly because of high sensitivity processing, but this is not a malfunction.

Striping or flicker may appear under lighting such as fluorescent lighting and LED lighting fixture.

This is characteristic of MOS sensors which serve as the camera’s pickup sensors.

This is not a malfunction.

The brightness or the hue of the recorded picture is different from the actual scene.

When recording under fluorescent or LED lighting fixture etc., increasing the shutter speed may introduce slight changes to brightness and colour. These are a result of the characteristics of the light source and do not indicate a malfunction.

When recording subjects in extremely bright locations or recording under fluorescent lighting, LED lighting fixture, mercury lamp, sodium lighting etc., the colours and screen brightness may change or horizontal striping may appear on the screen.

Reddish horizontal streaks appear on the LCD monitor during recording.

This is characteristic of MOS sensors which serve as the camera’s pickup sensors. It appears when the subject has a bright part. Some unevenness may occur in the surrounding areas, but this is not a malfunction.

It is recorded in pictures or motion pictures.

It is recommended that you take pictures while taking care not to expose the screen to sunlight or any other source of strong light.

- 254 -

Page 254
Image 254
Panasonic DMC-FT5/DMC-TS5 operating instructions 254, Taking pictures using Auto Bracket is not possible