Wi-Fi

Connecting Easily to a Smartphone/tablet (NFC)

Using the NFC “Near Field Communication” function, you can easily transfer data necessary for a Wi-Fi connection between this camera and the smartphone/tablet.

Compatible models

This function can be used with the NFC compatible device with Android (OS version 2.3.3 or higher). (excluding some models)

Controlling this camera remotely with a smartphone/tablet by using the NFC function

You can use the following functions by controlling this camera remotely with your smartphone/ tablet.

Remote recording (P178)

Playing back the pictures in the camera (P178)

Saving the pictures in the camera to the smartphone/tablet, or sending them to WEB services. (P178)

Sending the acquired location information to the camera. (P178)

Preparation:

(On the camera)

Set [NFC Operation] to [ON]. (P211) (On your smartphone/tablet)

Check that your smartphone/tablet is a compatible model.

Turn on the Wi-Fi function.

Install the “Image App” in advance. (P176)

1Launch “Image App” on your smartphone/tablet.

2 Touch the smartphone/tablet to [ ] of the camera.

This function can be used even while the camera is turned off.

3 When the connection confirmation screen is displayed, press 2/1 to select [Yes], and then press [MENU/SET].

4Touch the smartphone/tablet to [ ] of the camera again.

When the smartphone/tablet has connected, an image of this camera will be displayed on the smartphone/tablet.

The connected smartphone/tablet is registered to this

camera. A connection can be established with the operation of steps 1 and 2 from the second time onwards.

You can register up to 20 smartphones/tablets. When the number exceeds 20, registrations will be deleted, starting from the oldest touched one.

Performing [Reset Wi-Fi Settings] will delete the smartphone/tablet registration.

- 182 -

Page 182
Image 182
Panasonic DMC-FT5/DMC-TS5 Connecting Easily to a Smartphone/tablet NFC, 182, Compatible models, Preparation On the camera