Basic

[Version Disp.]

It is possible to check which version of firmware is on the camera.

Press [MENU/SET] on the version display screen to display information about the software on the unit.

[Format]

The built-in memory or card is formatted. Formatting irretrievably deletes all the data so check the data carefully before formatting.

Use a battery with sufficient battery power or the AC adaptor (optional) when formatting. Do not turn the camera off during formatting.

If a card has been inserted, only the card is formatted. To format the built-in memory, remove the card.

If the card has been formatted on a PC or other equipment, format it on the camera again.

It may take longer to format the built-in memory than the card.

If you cannot format, contact the dealer or Panasonic.

~[Language]

Set the language displayed on the screen.

If you set a different language by mistake, select [~] from the menu icons to set the desired language.

[Stabilizer Demo.]

Displays the amount of jitter the camera has detected.

AAmount of jitter

BAmount of jitter after correction

A B

The Stabiliser function is switched between [On] and [Off] every time [MENU/SET] is pressed.

[Stabilizer Demo.] is an approximation.

- 61 -

Page 61
Image 61
Panasonic DMC-FT5/DMC-TS5 Set the language displayed on the screen, Displays the amount of jitter the camera has detected