Panasonic DMC-G6 owner manual 146, Setting the wireless flash

Recording

Setting the wireless flash

Applicable modes:

By using flashes that support the wireless control (DMW-FL360L: optional), you can control firing of the built-in flash (or a flash attached to the hot shoe of this unit) and three flash groups separately.

Preparations: Open the flash of this unit by pressing flash open button. Alternatively, attach a flash (DMW-FL360L: optional) to this unit.

1Set the external flashes to be controlled to RC Mode, and then place them.

•Set the channel and groups for the external flashes to be controlled.

2Select [Flash] on the [Rec] menu. (P43)

3Select [Wireless] and then touch [ON].

•When [Wireless] is set to [ON], [WL] is displayed on the flash icon on the recording screen.

•When making detailed settings of the wireless flash, set the following from [Flash].

[Wireless Channel]

Select the channel that corresponds to the channel of the external flash you want to control.

Settings: [1CH]/[2CH]/[3CH]/[4CH]

[Wireless FP]

During wireless recording, an external flash fires an FP flash (high speed repetition of flash firing). This firing allows recording with the flash at a fast shutter speed.

Settings: [ON]/[OFF]

[Communication Light]

Set the communication light level for wireless recording.

Settings: [HIGH]/[STANDARD]/[LOW]

[Wireless Setup] A B

•Press the [DISP.] button to fire a test-flash. A Firing Mode

B Flash output

CLuminosity ratio

C

146