Recording

About Automatic Gain Control setting

Select [Auto Gain] on the screen shown in step 1 and set it.

[ON]: The brightness level is adjusted according to the number of pictures taken and the pictures are superimposed over each other.

[OFF]: Compensate the exposure to match the subject so that all the superimposed exposure effects will be just right.

Combining RAW images in the card

On the screen shown in step 1, set [Overlay] to [ON]. After [Start], Images in the card will be displayed. Select the RAW images, press [MENU/SET], and continue recording.

[Overlay] is available only for RAW images taken with this unit.

Image is not recorded until completion.

The recording information displayed for pictures taken with multiple exposures is the recording information for the last picture taken.

Items shown in gray on the menu screen cannot be set during multiple exposures.

Not available in these cases:

[Multi Exp.] is not available in the following cases.

When using [Time Lapse Shot]

When using [Stop Motion Animation]

194

Page 194
Image 194
Panasonic DMC-G6 owner manual 194, About Automatic Gain Control setting, Combining RAW images in the card