Panasonic DMC-G6 owner manual 251, Connecting to a smartphone/tablet by using the NFC function

Wi-Fi/NFC

Connecting to a smartphone/tablet by using the NFC function

Using the NFC “Near Field Communication” function, you can easily transfer data necessary for a Wi-Fi connection between this camera and the smartphone/tablet.

∫Compatible models

This function can be used with the NFC compatible device with Android (OS version 2.3.3 or higher). (excluding some models)

•For information on the operation and settings of NFC-compatible smartphones/tablets, refer to the operating instructions of your device.

Preparation:

(On the camera)	(On your smartphone/tablet)
• Set [NFC Operation] to [ON]. (P288)	• Check that your smartphone/tablet is a
	compatible model.
	• Turn on the Wi-Fi function.
	• Install the “Image App” in advance. (P248)

1Launch “Image App” on your smartphone/tablet.

•The screen for selecting the connection destination is displayed after the launch.

2While [ ] is displayed on the connection screen of the “Image App”, touch the smartphone/tablet to [ ] of this unit.

•It may take time to complete the connection.

•When the smartphone/tablet has connected, an image of this camera will be displayed on the smartphone/tablet.

•If a connection attempt by touching fails, restart the “Image App”, and then display the screen in step 1 again.

•If a connection is established during single picture playback, the picture will be transferred to the smartphone/tablet. (P254)

251