Panasonic DMC-G6 owner manual 214, Recording Motion Picture

Motion Picture

Recording Motion Picture

1 Start recording by pressing the motion picture button.

AElapsed recording time B Available recording time

•Recording of motion picture appropriate for each mode is possible.

•The recording state indicator (red) C will flash while recording motion pictures.

•If approximately 1 minute elapses without an operation being performed, part of the display will disappear. Press [DISP.] or touch the monitor to make the display reappear.

•When recording a motion picture, do not cover the microphone with your fingers or other objects.

•Release the motion picture button right after you press it.

A	C
3s
	R1m37s
	B

2 Stop the recording by pressing the motion picture button again.

•Still picture recording is also possible during the motion picture recording by fully pressing the shutter button. (P216)

Enabling/disabling the motion picture button [MENU] > [Custom]>[Video Button]>[ON]/[OFF]

•This function is for preventing accidental operation of the button.

Switching between the angle of view for taking pictures and the one for recording motion pictures

[MENU] > [Custom]>[Rec Area]>[!] (Picture)/[ ] (Motion picture)

•When the aspect ratio setting is different in still and motion pictures, the angle of view

changes at the start of motion picture recording. When [Rec Area] is set to [ ], angle of view during motion picture recording is displayed.

•The recording area indicated is a guide line.

214