151
Recording

Easily Optimizing the Brightness for a Specified

Area (Touch AE)
Applicable modes:
You can easily optimize the brightness for a touched position. When the face of the subject
appears dark, you can brighten the screen according to the brightness of the face.
You can optimize just the brightness for a touched position by using a function button or
you can optimize both the focus and brightness for a touched position by optimizing the
brightness when using the Touch AF.
Canceling the Touch AE function
Touch [ ].
[Metering Mode] returns to the original setting, and the brightness optimization position is
canceled.
Optimizing only the brightness for a touched position
1Set a function button to [Touch AE]. (P52)
The following step is an example in which [Touch AE] is assigned to [Fn6].
2Touch [ ].
3Touch [ ].
The setting screen for the brightness optimization position
is displayed.
[Metering Mode] is set to [ ], which is used exclusively
for the Touch AE.
4Touch the subject you want to optimize the

brightness for.

Touching [Reset] will bring the brightness optimization
position back to the center.
5Touch [Set].
AE
66
AE
AE
Fn6
Fn7
ュリヴヱハ
6HW5HVHW
DMC-G6PDF-VQT4Z78_eng.book 151 ページ 2013年4月25日 木曜日 午前10時5分